Advantech EKI-6558TI Скачать руководство пользователя | Manualshive

Страница: 5 / 99

background image

Safety Instructions

1.  Read these safety instructions carefully.
2.  Keep this User's Manual for later reference.
3.  Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not

use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment and

must be easily accessible.

5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may

cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the equipment to

the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over voltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only by

qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service personnel:

a.  The power cord or plug is damaged.
b.  Liquid has penetrated into the equipment.
c.  The equipment has been exposed to moisture.
d.  The equipment does not work well, or you cannot get it to work according to the user's

manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE

TEMPERATURE MAY GO BELOW -40

℃

(-40

℉

) OR ABOVE 85

℃

(185

℉

). THIS

COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A
CONTROLLED ENVIRONMENT.

v

«
...
3
4
5
6
7
...
»

Содержание EKI-6558TI




































































































Отзывы:

Нет отзывов

Похожие инструкции для EKI-6558TI

Бренд: Brightlink Страницы: 33

Бренд: Delta Electronics Страницы: 1

Бренд: WoMaster Страницы: 2

MatrixPRO 8x8 DVI

Бренд: Barco Страницы: 2

Digital Energy STS-400-25-3

Бренд: GE Страницы: 49

Бренд: Nobile Страницы: 2

Бренд: Crestron Страницы: 36

Бренд: W Box Technologies Страницы: 10

Бренд: SMART-AVI Страницы: 2

Бренд: Comet Labs Страницы: 46

S5130-EI Series

Бренд: H3C Страницы: 32

Бренд: YOKOGAWA Страницы: 74

Бренд: IOGear Страницы: 40

Бренд: Pakedge Device & Software Страницы: 8

Бренд: Black Box Страницы: 2

Бренд: Shenzhen Kinan Technology Страницы: 27

Бренд: Raritan Страницы: 7

Бренд: Analog way Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды