Advantech EKI-6311GN Скачать руководство пользователя

Страница: 27 / 79

EKI-6311GN-User_Manual V2.1

Page 21

When the IP address of the CPE is changed, the clients on the network often need to

wait for a while or even reboot before they can access the new IP address. For an

immediate access to the bridge, please flush the netbios cache on the client computer by

running the “nbtstat –r” command before using the device name of the CPE to access its

Web Management page.

In case the IEEE 802.11b/g/n Wireless Outdoor CPE is unable to obtain an IP

address from a valid DHCP server, it will fall back to default static IP address.

Use Fixed IP Address: Check this option. You have to specify a static IP address, subnet mask,

default gateway and DNS server for the CPE manually. Make sure the specified IP address is

unique on your network in order to prevent IP conflict.

If the IEEE 802.11b/g/n Wireless Outdoor CPE is configured as Router mode, you need to

configure some additional TCP/IP parameters for accessing the Internet.

IP Settings (Router)

This is available only under Router mode. Open “IP Settings (Router)” in “System” below to

configure the parameters of EKI-6311GN for accessing the Internet.

Figure 17 IP Settings (Router)

WAN Settings: Specify the Internet access method to Static IP, DHCP or PPPoE. Users must

enter WAN IP Address, Subnet Mask, Gateway settings provided by your ISPs.

LAN Settings: When DHCP Server is disabled, users can specify IP address and subnet mask

for the CPE manually. Make sure the specified IP address is unique on your network in order to

prevent IP conflict. When DHCP Server is enabled, users may specify DHCP IP Address Range,

Note:

Содержание EKI-6311GN
















































































Результаты поиска

Содержание EKI-6311GN

Отзывы:

Похожие инструкции для EKI-6311GN

Бренды по названию

Популярные бренды

Advantech EKI-6311GN, Руководство пользователя

Результаты поиска

Содержание EKI-6311GN

Отзывы:

Похожие инструкции для EKI-6311GN

Бренды по названию

Популярные бренды