manualshive.com logo in svg

Advantech EKI-1511X, Руководство пользователя, Страница: 43 / 76

Поделиться
Скачать
Advantech EKI-1511X Скачать руководство пользователя страница 43

35

EKI-1511X/1512X User Manual

Chapter 3

C

onfiguration

3.9

Administrator Settings

The configuration utility provides several administrator settings for easy management
and configuration. Right click the mouse on the device name in the sub-tree of Serial
Device Sever List Area, and select these administrator settings.

3.9.1

Import/Export Device Setting

The utility allows importing or exporting the serial device server’s setting via the
“.conf” file format.

3.9.2

Import/Export Serial Port Setting

The utility allows importing or exporting the serial port setting including “Basic Set-
ting” and “Operation Setting” via “.sps” file format.

3.9.3

Locate the Serial Device Server

If there are many serial device servers need your management, you may need to
identify which unit is correct to configuration on utility. Click “Locate” to make that
unit’s “Status” LED be steady on until you click “Stop Locate”.

Содержание EKI-1511X













































































Отзывы:

Нет отзывов