manualshive.com logo in svg

Advantech EKI-1511X, Руководство пользователя, Страница: 39 / 76

Поделиться
Скачать
Advantech EKI-1511X Скачать руководство пользователя страница 39

31

EKI-1511X/1512X User Manual

Chapter 3

C

onfiguration

3.6

Advanced Settings

The serial device server provides the advanced settings for some special applica-
tions which need critical time requirements. In normal applications, these settings are
recommended not to be set to avoid the unusual action happened.

 

Enable Delay Time (ms)

When you enable the delay time, the serial port will postpone the received data for
the time interval you set, and then send the received data to the TCP/IP network.

Ignore Purge

Some application program will purge the serial port while it is the first time opens this
serial port. You can ignore the purge command by enable this option. 

Disable Character Timeout Detection

Enable this option will disable the serial port character timeout detection.

Disable Multiple Connection

Enable this option will disable the multi-access function, thus the only one TCP con-
nection is allowed on this serial port.

Buffer Data Size

It determines the internal buffer size to queue data to become a packet.

Port Timeout

It determines the time period that received data from serial port will be postponed.

Содержание EKI-1511X













































































Отзывы:

Нет отзывов