45
EKI-1500 Series User Manual
5.
Locate
From System Port
and click the drop-down menu to select the target
COM port.
6.
From the network address list, select the address options to map.
The selected address displays the Device Port and (EKI serial device server
physical serial port) and the system port which will be the VCOM port for the PC.
Figure 5.2 Selecting Auto Mapping
7.
From the network address list, select the address options to map.
8.
Click
Map Selected Ports
to set the configuration.
Figure 5.3 Mapping Selected Ports
Once the mapping function is initialized, a successful mapping process results in the
virtual mapping of the designated physical serial port and VCOM PC port. See the
following figure.
Figure 5.4 Viewing VCOM Mapping Results
System Port
Device Port
Selected
Options
Содержание EKI-1500 Series
