Advantech EKI-1500 Series, Руководство пользователя

Страница: 26 / 88

EKI-1500 Series User Manual 16
2.3.1.2 Wall-Mounting
The wall mounting option provides better shock and vibration resistance than the DIN
rail vertical mount.
Before the device can be mounted on a wall, you will need to remove the DIN rail
plate.
1. Rotate the device to the rear side and locate the DIN mounting plate.
2. Remove the screws securing the DIN mounting plate to the rear panel of the
server.
3. Remove the DIN mounting plate. Store the DIN mounting plate and provided
screws for later use.
4. Align the wall mounting plates on the top and bottom side. The screw holes on
the device and the mounting plates must be aligned, see the following illustra-
tion.
5. Secure the wall mount plates with M3 screws, see the following figure.
Figure 2.14 Installing Wall Mount Plates
Once the wall mounting plates are secure on the device, you will need to attach
the wall screws (x8).
Note! When installing, make sure to allow for enough space to properly install
the cabling.