Advantech DMR2008 Скачать руководство пользователя страница 29

Страница: 29 / 31

Press [PLAY] while at Channel Monitor.

The Play-Back State consists of the following:

Replay Channel Selection Menu

Replay Time Selection Menu

Replay Status Display Menu

Pressing the [ESC] key goes back to the Channel Monitor mode.

A. Replay Channel Selection Menu

The record start and stop times as well as total duration are displayed. The duration is calculated by the number of the

frames. If the system is set up for 30 frames per second, 1/30 second is added for each frame. For 10 seconds per

frame, 10 seconds are added for each frame.

The [UP] and [DOWN] keys move the selection. The [Enter] or [PLAY] key selects the channel and brings up the

Replayed Time Selection Menu.

B. Replay time selection menu

The [UP] and [DOWN] keys move the selection. The

[RIGHT] key increased the value of the selected item

while the [LEFT] decreases it.

YEAR: 2002 ~ 2099

MONTH: 1 ~ 12

DAY: 1 ~ 31

HOUR: 0 ~ 23 (AM 12 is displayed as 0.)

MINUTE: 0 ~ 59

SECOND: 0 ~ 59

When DMR2008 is first powered on, it is set as the last

recorded time and then changed to the last replayed

time.

If there is no recorded data for the specified time, then the data at nearest time is replayed. If there is no more

recorded image, the message ‘NO RECORD’ flashes on the screen. Pressing the [ENTER] or [PLAY] key goes back

to replay display mode. Since every menu includes the last location, pressing [PLAY] three times will continue

replaying from the last replay.

C. Replay Display

It starts searching the hard disk for the selected recorded data while flashing the message ‘SEARCH’ on the screen.

Содержание DMR2008
































Результаты поиска

Содержание DMR2008

Отзывы:

Бренды по названию

Популярные бренды

Advantech DMR2008, Руководство пользователя

Результаты поиска

Содержание DMR2008

Отзывы:

Бренды по названию

Популярные бренды