Advantech DMR2008 Скачать руководство пользователя страница 16

Страница: 16 / 31

SETTING / EXIT: To maintain the current values, the mode must go back to RECORDING MODE by pressing [ENTER]

or [MENU].

B. CONFIGURATION

This item is selected for continuous recording. There is a submenu.

DMR2008 is only configured for Motion Detection as a factory default. The continuous recording can be configured by

setting the frames for the item that has FRAME OFF for the continuous recording. (As the values of resolution and

frame increase, total recording time will decrease.)

- COMPRESSION RATE :

This determines the Wavelet compression rate. The quality of the screen goes up as the

rate is decreased.

- SHARPNESS:

This determines the sharpness of the screen. The lower value indicated sharper image

– NORMAL RECORDING FRAME RATE :

This determines the number of frames per second for continuous recording.

30, 15, 10, 8, 6, 5, 4, 3, 2 or 1 frame per second is possible. For long term recording, 2, 3, 4, 5, 6, 7, 8, 9 or 10

seconds per frame can also be selected. When setting for the continuous recording, this value should be same as

EVENT RECORDING FRAME RATE. (Note: If this value is not set, there will be no recording.)

There will be no recording if EVENT RECORDING FRAME RATE is OFF even during continuous recording. Set it at

the same FRAME RATE.

EVENT RECORDING FRAME RATE:

This determines the number of frames per second for movement detected

recording. 30, 15, 10, 8, 6, 5, 4, 3, 2 or 1 frame per second is possible. For long term recording, 2, 3, 4, 5, 6, 7, 8, 9

or 10 seconds per frame can also be selected. Set it to OFF when there is no continuous recording in the same

channel.

Содержание DMR2008
































Результаты поиска

Содержание DMR2008

Отзывы:

Бренды по названию

Популярные бренды

Advantech DMR2008, Руководство пользователя

Результаты поиска

Содержание DMR2008

Отзывы:

Бренды по названию

Популярные бренды