Advantech DLT-V6210 Скачать руководство пользователя страница 19

Страница: 19 / 61

Mechanical installation

DLT-V6210 Manual V1.00

Page 19 / 61

7.1.2.

Secure attachment

Observe the following information about the mounting brackets:

−

All brackets and mounting parts supplied by Advantech-DLoG are only intended to be used for

attachment of the industrial PCs and the peripheral devices and may not be misused.

−

Only use suitable mounting brackets and screws permitted by Advantech-DLoG.

−

Ensure that ball-and-socket bases and mounting brackets are always attached correctly.

Please observe the mounting instructions supplied with the optional brackets.

7.1.3.

Handling the device

WARNING

Hazardous voltage, electrical shock from contacting with live parts.



Do not put DLT-V6210 into operation if it is damaged.



Do not open or modify DLT-V6210.

Risk of injury due to weight and sharp-edged parts.

DLT-V6210 can fall down and cause injuries due to its weight. The strain relief rail can have

sharp edges and cause cutting injuries.



Always hold DLT-V6210 by the housing with both hands.



Never use the antenna cap as a handle. It can break due to the weight involved.



Do not hold DLT-V6210 by the strain relief rail.



Use the assistance of a second person for installation work.

NOTICE: Physical damage

Damage and scratching of the touchscreen without transportation protective film.

The front display of DLT-V6210 is protected during transportation by a transparent film. This film

should remain on the front display during assembly to avoid damage to the front display surface.



Only remove the film after all of the installation work has been completed.

Содержание DLT-V6210






























































Результаты поиска

Содержание DLT-V6210

Отзывы:

Бренды по названию

Популярные бренды

Advantech DLT-V6210, Руководство пользователя

Результаты поиска

Содержание DLT-V6210

Отзывы:

Бренды по названию

Популярные бренды