Advantech CompactPCI MIC-3021/8, Руководство пользователя

Страница: 19 / 22

Chapter 2 Installation 19
To remove a card:
1. Unscrew the screws on the card front panel. Release the locking
latches on the handles.
2. Lift the upper handle up and press the lower handle down to release
the card from the backplane.
3. Slide the card out.
2.3.2 Before Operating the System
Before operating your system, first check your power supply source.
Adjust the switch on the power supply to the correct voltage.
Two mounting flanges are included for users who would like to install
the MIC-3021/8 on a 19" rack or on a panel. These flanges can be
installed on the front side for rack mounting or on the rear side for
panel mounting.
Four rubber stands can be attached to the bottom of the chassis for
desktop operation. They are not required for rack operation.
There are ventilation holes on the top and bottom of the chassis for
cooling. We advise you not to block these holes when installing the
chassis on a rack or placing it on a desktop.