ENERGY MONITORING BUNDLE
10
ACCESS Node-RED UI IN THE GATEWAY
1. Attach the antenna to the Wzzard™ antenna port on the gateway.
2. Attach the Ethernet cable to the ETH0 port on the gateway and the other end to your PC.
You will use an Ethernet connection to configure the gateway and to communicate with it.
3. Attach the supplied power supply and plug it in.
4. Open a browser on your computer and open the Node-RED™ configuration page. The
default address is:
192.168.1.1:1880/ui.
(Chrome or Firefox recommended.)
5. The Wzzard Node information values will populate when the node joins the network.
6. You can set up a phone number to receive text messages and/or an e-mail address for
receiving alerts on this page. For text messaging, you will need to select the cell carrier of
the receiving phone. If the carrier is not on the list, select custom, and add the URL of the
carrier to the phone number (ie: [email protected]). See Appendix A for
carrier text addresses. If your carrier is not listed, contact your carrier for the address of their
SMS gateway.
7. You can enable or disable alerts as well as setting the trigger values on this page also.
