VESR424D Serial Server
60
ELECTROSTATIC DISCHARGE PRECAUTIONS
Electrostatic discharge (ESD) can cause damage to any product, add-in modules or standalone
units, containing electronic components. Always observe the following precautions when
installing or handling these kinds of products:
1. Do not remove unit from its protective packaging until ready to install.
2. Wear an ESD wrist grounding strap before handling any module or component. If a
wrist strap is not available, maintain grounded contact with the system unit throughout
any procedure requiring ESD protection.
3. Hold the units by the edges; do not touch the electronic components or gold
connectors.
4. After removal, always place the boards on a grounded, static-free surface, ESD pad or
in a proper ESD bag. Do not slide the modules or standalone units over any surface.
WARNING!
Integrated circuits and fiber optic components are extremely susceptible to
electrostatic discharge damage. Do not handle these components directly unless you are a qualified
service technician and use tools and techniques that conform to accepted industry practices.
DISCLAIMER & BRAND
© 2018 B+B SmartWorx – powered by Advantech. All rights reserved. The information in this document is subject to change without notice. B+B SmartWorx assumes no
responsibility for any errors that may appear in this document. Ilinx VESR424D is a trademark of B+B SmartWorx. Other brands or product names may be trademarks and are the
property of their respective companies.
Documentation Number: VESR424D_4818m
