5. ROUTER DESIGN
5.8.1
Status indication
About router status inform three LED indicators on the front panel. The ETH port has two
additional LEDs that provide information about the port status.
Caption
Color
State
Description
PWR
Green
Blinking
On
Fast blinking
Router is ready
Starting of the router
Updating firmware
DAT
Red
Blinking
Communication in progress on the radio channel
WAN
Yellow
LED goes out
1x per one sec.
LED goes out
1x per two sec.
LED goes out
1x per five sec.
Signal strength is from –50 dBm to –69 dBm
Signal strength is from –70 dBm to –89 dBm or differ-
ence between neighbours cells is exactly 3 dBm
Signal strength is from –90 dBm to –113 dBm or differ-
ence between neighbours cells is smaller than 3 dBm
ETH
Green
On
Off
Selected 100 Mbps
Selected 10 Mbps
ETH
Yellow
On
Blinking
Off
The network cable is connected
Data transmission
The network cable is not connected
Table 5: Status indication
State indication of WAN LED is updated every 10 seconds.
15
