xi
SE400 SERIES
CE
This product has passed the CE test for environmental specifications when shielded cables
are used for external wiring. We recommend the use of shielded cables. This kind of cable is
available from Advantech. Please contact your local supplier for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for
passing included the equipment being operated within an industrial enclosure. In order to pro-
tect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we
strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
Safety Instructions
Read these safety instructions carefully.
Keep this user manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use damp cloth. Do not
use liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
The openings on the enclosure are for air convection. Protect the equipment from over-
heating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the equipment to
the power outlet.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
All cautions and warning on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over voltage.
Never pour any liquid into an opening. This may cause fire or electrical shock.
Never open the equipment. For safety reasons, the equipment should be opened only by
qualified service personnel.
If one of the following situations arises, get the equipment checked by service personnel:
– The power cord or plug is damaged.
– Liquid has penetrated into the equipment.
DECLARATION OF CONFORMITY
