iMcV-LIM
10
Link Fault Pass-Through (LFPT)
Link Fault Pass-Through (LFPT) is a troubleshooting feature that combines TX
and FX LinkLoss from both the local and remote iMcV-LIM modules. LFPT is
enabled by turning on both FX and TX LinkLoss on both modules. This feature
allows either end of the conversion to detect a link fault occurring at the other
end of the media conversion chain.
Regardless if there is a break in segment 1, 2 or 3, the link will drop on the
switches at both ends. The link fault is passed through the media conversion
and is observed at each end. It acts just like it would if the devices were
directly connected.
