Advantech B+B SmartWorx IE-iMcV-2xLIM, Руководство пользователя

Страница: 7 / 15

IE-iMcV-2xLIM
6
and the iMcV-module is configured by the chassis’ management
module. If the SNMP management module is removed or fails, the
iMcV-modules will revert back to the DIP Switch settings. When an
iMcV-module configuration changes from the management
module’s settings to DIP Switch settings, the traffic across the
iMcV-module will be interrupted for a very short period of time.
• When introducing a Management Module to a chassis full of
working non-Configuration Control iMcV-modules, the iMcV-
modules will stop using the DIP Switch settings and start using the
Management module’s settings. When an iMcV-module changes
from DIP Switch settings to the Management module’s settings, the
traffic across the iMcV-modules will be interrupted for a very short
period of time
• When removing an existing iMcV-module and replacing it with a
different iMcV-module, the configuration of the former iMcV-module
remains.
UNMANAGED MODULES
Before installing, configure the IE-iMcV-2xLIM, TX/SFP modules for the desired
features. The table below indicates the available features and settings for the IE-
iMcV-2xLIM, TX/SFP modules.
After configuring the DIP Switches for the desired settings, install the module and
connect the appropriate cables (refer to Installing an IE-iMcV-2xLIM, TX/SFP
section for more information).