Advantech ASMB-830 Series Скачать руководство пользователя страница 94

Страница: 94 / 110

ASMB-830 User Manual

6.1

LAN Configuration

6.1.1

Introduction

The ASMB-830 has two Gigabit Ethernet LAN connections via dedicated PCI

Express x1 lanes: GbE LAN1 - Intel® I210 and GbE LAN2 - Intel® I210; two 10G

Base-T LAN connectors LAN3 and LAN4 - Intel® X550. They eliminate the bottle

neck of network data flow and incorporate Gigabit Ethernet at 10 Gbps.



10/100/1000 & 10G Base-T Ethernet controller



10/100/1000 & 10G Base-T triple-speed MAC



Full duplex at 10/100/1000 Mbps or 10 Gbps and half duplex at 10/100/1000

Mbps



Wake-on-LAN (WOL) support

The integrated Intel® Gigabit Ethernet controller supports all major network operating

systems. However, the installation procedure varies with different operating systems.

In the following sections, refer to the one that provides the driver setup procedure for

the operating system you are using.

6.1.2

Windows Series Driver Setup

When the folder is displayed, navigate to the “LAN” folder and click the executable

file to complete the installation of the drivers for the OS that you need.

Содержание ASMB-830 Series















































































































Результаты поиска

Содержание ASMB-830 Series

Отзывы:

Advantech ASMB-830 Series, Руководство пользователя, Страница: 94 / 110

Результаты поиска

Содержание ASMB-830 Series

Отзывы: