Advantech ASMB-830 Series Скачать руководство пользователя страница 24

Страница: 24 / 110

ASMB-830 User Manual

2.1

Introduction

You can access most of the connectors from the top of the board as it is being

installed in the chassis. If you have a number of cards installed, you may need to par

tially remove a card to make all the connections.

2.2

USB Ports (USB3_12, USB3_34, USB3_5)

The USB ports comply with USB 2.0 and USB 3.2 Gen1. Transmission rates of up to

480 Mbps (USB 2.0) / 5Gbps (USB 3.2 Gen1) and fuse protection are supported. The

USB interface can be disabled in the system BIOS setup.

2.3

LAN Ports (LAN1_2, LAN3_4, LAN5)

The ASMB-830 is equipped with two 10GbE and two GbE LAN ports. They are all

with RJ-45 jacks and supported by all major network operating systems. One GbE

LAN (LAN5) is shared with IPMI for system management.

USB3_12

USB3_34

USB3_5

USB3_12

USB3_34

LAN5

LAN3_4

LAN1_2

LAN1 LAN3

LAN2 LAN4 LAN5

Содержание ASMB-830 Series















































































































Результаты поиска

Содержание ASMB-830 Series

Отзывы:

Advantech ASMB-830 Series, Руководство пользователя, Страница: 24 / 110

Результаты поиска

Содержание ASMB-830 Series

Отзывы: