Advantech AIMB-740 Series Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 134

Advantech AIMB-740 Series Скачать руководство пользователя страница 84

AIM-740/741 User’s Manual

68

Chapter 7 USB 2.0 Configuration

7.1 Introduction

The AIMB-740/741 is designed with Intel ICH4 which supports both
USB1.1 and USB 2.0 high-speed transmission. It still remains the com-
patibility with today's USB device. High-speed USB 2.0 provides data
transfer up to 480Mb/s which is 40 times faster than USB 1.1. It is ideal
for today's speed-demanding I/O peripherals.

7.2 Features

•  Provides data transmission rate up to 480Mb/s
•  Offer 40 greater bandwidth than USB 1.1
•  Offers complete compatibility with current USB device

7.3 Installation

Note:

Before installing this driver, make sure the CSI
utility has been installed in your system. See
Chapter 4 for information on installing the CSI
utility.

Note:

USB 2.0 driver is not available for Windows
98SE/ME from AIMB-740/741 driver CD. Under
these operating systems, the USB device will
operate at USB 1.1 speeds.

«
...
82
83
84
85
86
...
»

Содержание AIMB-740 Series







































































































































Отзывы:

Нет отзывов