Advantech AIMB-740 Series, Руководство пользователя, Страница: 54 / 134

AIMB-740/741 User’s Manual 38
Select Disable if you do not want to use AC-97 audio. Option is "Auto",
"Disabled".
3.6.6 Init Display First
This item allows you to choose which one to activate first, PCI Slot or on-
chip VGA. The choices: "PCI Slot", "Onboard/AGP".
3.6.7 Onboard LAN1 Control
Options are "Enabled" and "Disabled" Select Disable if user does not
want to use onboard LAN controller1
3.6.8 Onboard LAN2 Control
Options are "Enabled" and "Disabled" Select Disable if user does not
want to use onboard LAN controller2
3.6.9 IDE HDD Block Mode
If your IDE hard drive supports block mode select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive
can support.
3.6.10 Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip. The
Choice : "Disabled", "LAN1", "LAN2".
3.6.11 POWER ON Function
To select the method to power on the system. The Choice : Password, Hot
KEY, Any KEY, Button ONLY, Keyboard 98.
3.6.12 Hot Key Power ON
To setup which Hot Key has the Power ON function. The Choice : "Ctrl-
F1", "Ctrl-F2", "Ctrl-F3", "Ctrl-F4", "Ctrl-F5", "Ctrl-F6", "Ctrl-F7",
"Ctrl-F8", "Ctrl-F9", "Ctrl-F10", "Ctrl-F11", "Ctrl-F12".
3.6.13 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk drives to
the onboard floppy disk drive connector instead of a separate controller
card. If you want to use a different controller card to connect the floppy
disk drives, set this field to Disabled.
3.6.14 Onboard Serial Port 1
The settings are "3F8/IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/ IRQ3"
and Disabled for the on-board serial connector.
3.6.15 Onboard Serial Port 2
The settings are "3F8/IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/ IRQ3"
and Disabled for the on-board serial connector.