manualshive.com logo in svg

Advantech AIMB-581, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-581 Скачать руководство пользователя страница 78

AIMB-581 User Manual

68

6.1

Introduction

The Intel mobile Core i7-2600, Core i5-2400, Core i3-2120, Pentium G850, Celeron
G540 CPUs with dual cores are embedded with an integrated graphics controller.
You need to install the VGA driver to enable this function.
Optimized integrated graphic solution: With Intel Graphics Flexible, versatile display
options and 32-bit 3D graphics engine are supported. Dual independent displays and
enhanced display modes for widescreen flat panels include extended, twin, and
clone dual display modes, plus optimized 3D support delivers an intensive and realis-
tic visual experience.

6.2

Windows 7/XP

Insert the driver CD into your system's CD-ROM drive. Navigate to the "VGA" folder
and click "setup.exe" to complete the installation of the drivers for Windows 7 and
Windows XP.

Note!

Before installing this driver, make sure the CSI utility has been installed 
in your system. See Chapter 5 for information on installing the CSI util-
ity.

Содержание AIMB-581











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды