manualshive.com logo in svg

Advantech AIMB-581, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-581 Скачать руководство пользователя страница 74

AIMB-581 User Manual

64

5.1

Before You Begin

To facilitate the installation of the enhanced display drivers and utility software, read
the instructions in this chapter carefully. The drivers for AIMB-581 are located on the
software installation CD. The driver in the folder of the driver CD will guide and link
you to the utilities and drivers under a Windows system. Updates are provided via
Service Packs from Microsoft*.

Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software’s user manual before performing the installa-
tion.

5.2

Introduction

The Intel

®

 Chipset Software Installation (CSI) utility installs the Windows INF files

that outline to the operating system how the chipset components will be configured.
This is needed for the proper functioning of the following features:

Core PCI PnP services

IDE Ultra ATA 100/66/33 and Serial ATA interface support

USB 1.1/2.0 support (USB 2.0 driver needs to be installed separately for Win98)

Identification of Intel

®

 chipset components in the Device Manager

Note!

The files on the software installation CD are compressed. Do not 
attempt to install the drivers by copying the files manually. You must use 
the supplied SETUP program to install the drivers.

Note!

This utility is used for the following versions of Windows, and it has to be 
installed 

before

 installing all the other drivers:

Windows 7 (32-bit)

Windows 7 (64-bit)

Windows XP professional edition (32-bit)

Windows XP professional edition (64-bit)

Содержание AIMB-581











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды