1-26
Chapter 1: Product introduction
Audio 2, 4, or 6-channel configuration
Refer to the audio configuration table for the function of the audio ports in 2, 4,
or 6-channel configuration.
7. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
8. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
9. VGA port. This 15-pin VGA port connects to a VGA monitor.
10. Serial connector. This 9-pin COM1 port is for serial devices.
11. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
1.10.2 Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
NOTE:
Orient the red markings on
the floppy ribbon cable to PIN 1.
Floppy disk drive connector
PIN 1
FLOPPY
¨
Port
Headset
2-channel
4-channel
6-channel
Light Blue
Line In
Front Speaker Out
Front Speaker Out
Lime
Line Out
Rear Speaker Out
Rear Speaker Out
Pink
Mic In
Mic In
Center/Subwoofer
