manualshive.com logo in svg

Advantech ADAM-3600-A1F, Руководство пользователя

Поделиться
Скачать
Advantech ADAM-3600-A1F Скачать руководство пользователя страница 41

35

ADAM-3600-A1F User Manual

Chapter 4

S

ystem

Configuration

File Viewer Tab

Query Filter

This filter is for setting the criteria to query the logged CSV file from USB Thumb or SD card. 
Users can select the filter modes they want to use, and click "Query" button to query the 
logged files.

There are three filter modes for the file viewer of the media storage: Time filter, Amount of 
Latest Files Filter and File Format Filter. If the user selects Time Filter, they can see the time 
stamps of the oldest file and the latest file in the storage device. Then, users can set the time 
period by setting Start Time and End Time. This period has to be between the oldest time-
stamp and the latest timestamp. Then, they can query the files in the storage device that the 
timestamps in this period.

If users select Amount of Latest Files Filter, they can see the total number of files in the stor-
age device at the field Current Total Amount. Users can set the index period by setting Start 
Index and End Index, then they can query the files in the storage device that the indexes in 
this period.

If users selected File Format Filter, then they can query the CSV files in the storage device

Содержание ADAM-3600-A1F







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды