![Advantech ACP-1120 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/advantech/acp-1120/acp-1120_abridged-user-manual_2858263013.webp)
9
Chapter 2
Momentary Switch:
Use this switch and by way of ATX(PS_ON) func-
tion to turn on system power. Please use system shutdown to turn off sys-
tem power automatic or press momentary switch for a while to turn off
system power
System Reset Switch:
Press this switch to reinitialize the system. This is
the same as the hardware reset button. The rear section of chassis
includes: 3-slot I/O bracket, and a DB-9 bracket. Refer the Figure 2-2.
2.1.3 Drive Bay Installation
The ACP-1120 standard drive bay can hold one slim-type CD-ROM, two
3.5" driver bay and dual hot-swappable 3.5" HDD drawer.
Installation disk drives
a.
Remove the Top Front Cover
b.
Undo the three screws fixing the standard drive bay.
c.
Lift off the standard drive bay.
d.
Install slim-type CD-ROM and 3.5" driver as Figure 2-3
e.
Insert the drives into their proper locations as Figure 2-4 and secure
them with the screws provided.
f.
Connect the disk drive power and signal cables.
Figure 2.2: Rear Chassis
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from