![Advantech ACP-1120 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/advantech/acp-1120/acp-1120_abridged-user-manual_2858263012.webp)
ACP-1120 User’s Manual
8
Chapter 2 System Setup
2.1 System Installation
2.1.1 Removing the top cover
The first installation step is removing the chassis cover. You will need a
Phillips screwdriver. Top cover is fixed to the chassis with five (6) M3
sink-flat screws. To remove the top covers:
1.
Detach the six sink-flat screws on the top of chassis.
2.
Lift off the top cover.
2.1.2 Chassis Front and Rear Sections
The control switches located behind the door are used for system power
switch and system reset. On the right side of system power switch, there
are IDE 0 and IDE 1 hot-swappable HDD drawer. On the top of IDE 0,
there are Power LED and HDD LED. Refer the Figure 2-1..
WARNING:
Before starting the installation process, be sure
to shut down all power from the chassis. Do this
by turning off the power switch, and unplugging
the power cord from the power outlet. When in
doubt, consult with an experienced technician.
Figure 2.1: Front Chassis
IDE 0
IDE 1
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from