Advantech AMT SSPB-Ci60, Инструкция по установке и эксплуатации

Страница: 18 / 49

SSPB-Ci60
4.4 SPECIFICATIONS
The Block Up-Converters specified herein are capable of meeting or exceeding the performance
specifications listed in the following table over frequency range, operating temperature and line
voltage variation, unless otherwise specified. The units will meet all RF performance specifications
within thirty minutes of application of prime power.
TABLE 1 : ELECTRICAL SPECIFICATIONS
L-Band Input Frequency 1225 – 1525 MHz
RF Output Frequency Range 6.725 – 7.025 GHz
Frequency Stability Based upon 10 MHz Internal Reference
RF Output Power @ 1 dB Gain Compression
(P1dB)
+ 47 dBm, min. (60 W saturated power)
Linear Gain
68 dB
±
0.5 dB, @ 6.875 MHz and +23
°
C
Gain Adjustment Range 20 dB (between 48 dB and 68 dB)
Gain Flatness: over 300 MHz
over 10 MHz 4 dB p–p, max
0.3 dB, max
Gain Variation Over Temperature 3 dB p-p, over the entire bandwidth
L-Band Input Impedance
50
Ω
L-Band Input Return Loss 18 dB, min
Output Return Loss 18 dB, min
Noise Power Density in-band
in Rx band @ 4200 MHz - 83 dBm/Hz, max
- 155 dBm/Hz, max
Spurious at rated P1dB - 60 dBc, max
Harmonics at rated P1dB - 60 dBc, max
Third Order Intermodulation
(two equal tones 5 MHz apart)
- 26 dBc, max @ 3 dB total back-off from rated P1dB
Local Oscillator Frequency 5.500 GHz
Local Oscillator Leakage - 20 dBm, max
Output Phase Noise
@ Offset: 100 Hz
1 kHz
10 kHz
.
≥
100 kHz
CI-Band Single Side Band Phase Noise (max)
- 65 dBc/Hz
- 75 dBc/Hz
- 85 dBc/Hz
- 95 dBc/Hz
17