Customer Service 1-888-707-1880 7 Dyaco Canada Inc. © 2013
Or email us at customerservice@
dyaco
.ca
STEP 5
1.
Remove the four flat cross head screws (8) from the back of the computer (5).
2.
Connect the extension sensor wire (23) to the wire at the back of the computer (5)
3.
Attach computer (5) to the computer bracket of the upright (3) and secure with 4 flat cross head
screws (8).
Note: Insert the wire into the opening of the upright to ensure that you do not pinch the
wires when you attach the computer.
STEP 6
1.
Attach the right pedal strap (52R) to the right pedal (29R). Note: The end with the adjustable holes
must be set outwards. Repeat for the left pedal strap (52L)
2.
Attach the right pedal (52R) to the right crank arm (34). Repeat for the left pedal (52L
NOTE
: The pedals R & L. The right pedal should be threaded on clockwise and the left pedal should
be threaded counter-clockwise.
You have completed the assembly of your cycle.
Please inspect your cycle to ensure that all nuts and bolts have been
tightened before you start to use your cycle.
