Advantage 16116488-1, Руководство пользователя

Страница: 15 / 20

Customer Service 1-888-707-1880 14 Dyaco Canada Inc. © 2013
Or email us at customerservice@
dyaco .ca
TROUBLE SHOOTING
Problem Cause Correction
Monitor does not display Batteries not installed Insert batteries
No speed or distance
displays on the monitor
Sending unit not connected
Securely plug sending unit into
extension wire and the back of
the computer
Sending unit not working properly Replace sending unit
Computer not working properly Replace computer
No tension
Motor cable or resistant cable not
connected
Securely connect the motor cable
into the extension motor cable
and the resistant cable
Magnetic wheel not working
properly
Replace magnetic wheel
Heart rate not displaying
Pulse wire not connected not
connected
Securely plug wires together
Finger pulse defective Replace monitor
Computer not working properly
Replace computer
Grinding Crank bearing defective Replace crank bearings
Idle pulley defective Replace idle pulley
Mag. flywheel defective Replace mag. flywheel
Squealing Poly V-belt slipping Adjust poly v-belt
Maintenance
The safety of this produce can be maintained only if regular periodic checks are made. Most
checks can be performed once a week. However some checks should be made before each
workout, and are indicated as such below.
Checks

Be sure batteries are new and electronic connection are clean and tight.

Check that seat nuts are secure, check before each workout.

Check that pedals are tight, pedals can work loose over time.

Check that stabilizer bolts are tight, check before each workout this.

Check that handlebar is secure, if not, tighten, check before each workout this.

Should a part become defective, replace it immediately. Do not allow use of the equipment
until it has been repaired.
Cleaning
Almost all surfaces are washable. A damp cloth is sufficient to clean most surfaces of this unit.
Be careful not to drip water on the monitor. A mild liquid soap may be added if neede
d.