8
Mounting Instructions
Select a mounting location that provides the operator easy access to the unit and a clear view of the
controls through the cover of the controller. The location should be convenient to grounded electrical
connections, the needed sample line plumbing, and should be on a stable vertical surface.
WARNING: Avoid locations that expose the controller to direct sunlight, vapors, vibration,
liquid spills or extreme temperatures; less than 0°F (-17.8°C) or greater than 120°F (50°C). EMI
(electromagnetic interference) from radio transmissions and electric motors can also cause damage
or interference and should be avoided.
Electrode Installation
0HJD7URQ07FRQWUROOHUVPD\FRPHFRQ¿JXUHGIRUYDULRXVFLUFXODWLQJZDWHUV\VWHPV/LVWHGEHORZDUH
LQVWUXFWLRQVIRUW\SLFDOFRROLQJWRZHUDQGERLOHULQVWDOODWLRQV<RXUVSHFL¿FLQVWDOODWLRQUHTXLUHPHQWVPD\
GLႇHUEXWVKRXOGFRQIRUPWRWKHVHLQVWUXFWLRQVDVPXFKDVSRVVLEOHIRUSURSHURSHUDWLRQ
A.
Cooling Tower
7KHVWDQGDUGSUREHVDQGRUÀRZDVVHPEO\IRUFRROLQJWRZHULQVWDOODWLRQVLVFRQVWUXFWHGRIVFKHGXOH
39&DQGVXSSOLHGZLWKñ»´VOLS¿WWLQJVIRULQVWDOOLQJLQWRDVDPSOHOLQH7RLQVXUHSURSHURSHUDWLRQWKH
VDPSOHOLQHPXVWKDYHDÀRZUDWHRIJSP,QOHWSUHVVXUHPXVWEHKLJKHUWKDQRXWOHWSUHVVXUHLQ
RUGHUIRUZDWHUWRÀRZSDVWWKHHOHFWURGHVWRDFKLHYHWKHUHTXLUHGUDWH7KHSUREHVDUHWHPSHUDWXUH
compensated for increased accuracy.
NOTES:
,QVWDOODQLVRODWLRQYDOYHRQHLWKHUVLGHRIWKHÀRZDVVHPEO\VRHOHFWURGHVFDQEH
easily isolated for removal and cleaning.
2.
A line strainer is recommended upstream from the probes to protect against fouling
and damage.
3.
Mount pH or ORP electrodes vertically.
4.
Green solution reference wire must be connected to either pH or ORP sensor. If both
pH & ORP are present on system card, only one solution reference connection is
needed.
6\VWHPVZLWKDÀRZVZLWFKUHTXLUHJSPÀRZUDWHWRRSHUDWHRXWSXWV
WARNINGS:
1.
Electrodes are O-ring sealed, which if damaged will cause a leak.
2.
Do not allow pH sensor tips to dry out, damage will occur.
3.
Do not exceed a water temperature range of 32°F to 140°F.
4.
Do not exceed a maximum pressure of 125 psi.
