Advansus iQ96503-IQGM Скачать руководство пользователя страница 6

Страница: 6 / 81

MX965Q2

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor. Alternatively, please try

the following help resources for further guidance. Visit the Advansus website for FAQ,

technical guide, BIOS updates, driver updates, and other information:

http://www.advansus.com.tw/Support/Support.asp

Conventions Used in This Guide

To make sure that you perform certain tasks properly, take note of the following symbols

used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when

trying to complete a task.

CAUTION: Information to prevent damage to the components when

trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Disclaimer and Notice

The manufacturer reserves the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order to improve

design and/or performance. The manufacturer assumes no responsibility or liability for the

use of the described product(s), conveys no license or title under any patent, copyright, or

masks work rights to these products, and makes no representations or warranties that

these products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. For the detail product information, please refer to user’s manual.

Содержание iQ96503-IQGM


















































































Результаты поиска

Содержание iQ96503-IQGM

Отзывы:

Похожие инструкции для iQ96503-IQGM

Бренды по названию

Популярные бренды

Advansus iQ96503-IQGM, Руководство пользователя

Результаты поиска

Содержание iQ96503-IQGM

Отзывы:

Похожие инструкции для iQ96503-IQGM

Бренды по названию

Популярные бренды