Installation and Operation Manual S400 series
2
1. Introduction
1.1. General presentation ........................................ p.3
1.2. Components supplied with your Depth S400 ...... p.4
1.3. Technical characteristics ................................... p.4
2. General operation
2.1. Powering on ..................................................... p.6
2.2.Operation in normal mode.................................. p.6
2.2.1. Selecting information on the display
2.2.2. Selecting units of measurement
2.2.3. Countdown timer
2.2.4.
Backlighting
2.3. Alarms ............................................................. p.8
2.3.1. Setting the echo sounder alarm thresholds
2.3.2. Setting the battery alarm threshold
2.4. Configuration.................................................... p.10
2.4.1.
Keel
offset
2.4.2. Configuring the countdown timer
2.4.3. Simulation mode
2.4.4.
Key
beeps
2.4.5. Resetting data in the memory
2.5. Standby ........................................................... p.13
2.6. Network operation (Bus AS-1) ........................... p.13
2.7.1. Displaying multiple data
2.7.2. Remote access
2.7. Messages ......................................................... p.14
3. Installation
3.1. NMEA 0183 interfacing...................................... p.15
3.1.1. NMEA 0183 input interface
3.1.2. NMEA 0183 output interface
3.2. Mounting and connections................................. p.15
3.2.1. Mounting the Depth S400 unit
3.2.2. Description of electrical connections
3.2.2.1. Bus connection
3.2.2.2.
Sounder
connection
3.2.3.
Connections
4. Troubleshooting
...................................... p.18
Table of contents
