1.3
HV-2100 Jet Dimensions
Shown below are the mechanical dimensions of the HV-2100. Units are in millimeters
[inches].
The HV-2100 can be mounted to a variety of robots when X-Y-Z motion is desired.
It can also be mounted rigidly over a transporting mechanism like a conveyor belt or
shuttle table.
The HV-2100 provides a dovetail rear mounting plate for rigid attachment to a
robot’s XYZ stage. An optional mating dovetail mount is available from Advanjet
(P/N 03-2312).
The dispense tip relative to the mounting holes and the rear mounting plate
dimensions are shown in mm in the figure below. It is highly recommended that any
mounting scheme allow for vertical adjustment so the dispensing tip to dispensing
surface can be easily adjusted.
116.1
[4.57]
105.1
[4.14]
28.9 [1.14]
106.8
[4.20]
25.4 [1.00]
38.1
[1.5]
44.5
[1.75]
52.8 [2.08]
Page 6 of 22
Advanjet HV-2100 Jet Setup and Operation
3A6244A
