Advancing Alternatives Aegis Tec, Руководство пользователя

Страница: 16 / 20

CONFIGURATION
Configuration Setup
ID Description Default Min Max
P0 Number of vent motor circuits 2 0 3
P1 Number of fan circuits 0 0 6
P3 Number of heaters 2 0 4
P6
Wind average minutes. The response time for wind to
average out the gusts
3 1 5
P7 Wind wheel calibration 25=MPH 17=KPH 25
P10
Type of 2nd sensor
0 = none, 1 = humidty, 2 = amps, 3 = temperature
0
P18 How many vent motors are in zone2 0
P19 Max seconds vent motors will close for rain or high wind 250
P25 Is anemometer connected to Input#2 No
P26
Do you want ability for fans to turn off at high temperature?
(If you have smaller fans that need to turn off when larger
fans turn on)
No
P28 Farenheit or Celsuis F
P30 Revert controller to defaults
P34
Fan#1 input. If fan should turn off if an Input is on
1 = off if input #1 is on, 2 = off if input#2 is on
0 2
P35 - P39 Remaining fan’s inputs , see P34 0 2
P40
Vent Motor #1 rain sensor uses input #
You select which input curtain#1’s rain sensor is connected 0 2
P41
Vent Motor #2 rain sensor uses input #
You select which input curtain#2’s rain sensor is connected 0 2
P42
Vent Motor#3 rain sensor uses input #
You select which input curtain#3’s rain sensor is connected 0 2
P43
Humidity Vent, which vent motor will open if humidity gets
too high.
16