11
2.6 Pager Zones
Each Pager Address must be configured to
define
from which zones the events will be sent to the
pager.
This can be used to prevent unnecessary or
unwanted
events being sent to all pagers or it can be used
to define
only those zones that are relevant to a specific
person.
For example, a nurse pager can be configured
to cover
only those zones concerned with the hospital
wards
covered by the nurse.
Up to two ranges can be defined.
Right Click in the table or on a specific address
to Add /
Delete / Edit and entry.
A new pop-up dialogue box is shown.
Define the new pager number and address
ranges as
required. See example below.
If only one
address
range is
required,
then use “Zonal Range 1” only.
The maximum zone range is 1
– 2000.
2.7 Upload Communications
To upload the configuration data to the pager interface, first
unplug the
cable from the base card and plug in the upload / download
lead as
shown opposite.
Click on the “Connect to Target” button and when
communic
ations is established, click on the “Upload” button to
transfer the
data.
On completion, remove the upload / download lead and re-fit
the lead
from the base card.
Pager Interface
