Advanced MxPro 4 4100S, Руководство пользователя

Страница: 6 / 12

www.advancedco.com
6
2 Installation
2.1 Identification of Parts
The following diagrams show the major parts of the panels.
2.2 Installing the Enclosure
The panel can weigh in excess of 15kg when the batteries are installed. Use the appropriate
fixing hardware to secure the panel to the wall. Observe recommended lifting practices to
guard against spinal injury.
2.2.1 Removing and Replacing the Enclosure Cover
The enclosure cover is fixed in place with two tamper resistant hexagon key screws. These require the use of a
2.5mm Allen Key. The enclosure cover must be connected to earth. When replacing the cover, always ensure
that the earth lead spade terminal is securely seated onto the blade terminal in the back box.
2.2.2 Removing the Chassis
It is recommended that the chassis be removed before fitting the panel to the wall. To remove the chassis:
Disconnect the earth cable connecting the chassis to the spade terminal on the rear enclosure.
Remove the two screws holding the chassis to the back box. Keep these items in a safe place for later re-use.
Unplug the 3-way connector feeding the power supply to the Base Card. Carefully remove the chassis from the
rear enclosure and place in a safe place to prevent accidental damage.
Do not lift the chassis by holding onto any of the printed circuit cards. Hold the chassis by the
metal plate only.
Earth Lead to
Cover
Chassis
Assembly
AC Mains
Input Battery
Leads
Rear
Enclosure