Advanced BMW OBDII, Быстрый старт

Страница: 7 / 11

A)
If the
D , K and Ready LEDs are light up
green
and you heard rising
beep
, the
car is ready to start.
B)
If you hear
short multiple beeps ,
insert the
just programmed
key into the
ignition
coil
, turn on the ignitio
n/press START/STOP button
and wait until
programming is
done
(it can take from 10 to 60 seconds).
Do not disconnect the device until the
procedure is done. Wait until D and K LEDs constantly light up green and you can
hear a rising beep sound.
C)
If the LED D
lights up
green , K
lights up
red
and you can hear a
constant beep
it
means that
only the “service key” is programmed (read more about Service key
option below).
D)
If the LED D is red + lowering the sound signal an error has occurred (see errors).
Note: The device stores codes of all programmed keys
– that’s why you can
reprogram those keys to other vehicles.
You can watch the full process of programming new key here:
https://youtu.be/mHrudo-lnl0
Key programming