Advanced BMW OBDII, Быстрый старт

Страница: 5 / 11

If your security alarm is off or you do not have security alarm at all then you
do not need to do these operations. You can continue to the key
programming procedures.
Make sure that the option switch is switched to the "Alarm Off" position.
Make sure that the car battery status shows 11 or higher voltage.
Connect the programmer to the car OBDII. (
wake up the car’s CAN bus: unlock
the car door with a mechanical key or press the START
/STOP
button).
The LEDs on the programmer will
blink
K – green
D - red
Y
ou will hear a beep and the LEDs will stop blinking
within 5-10 seconds. The alarm will turn off.
Don’t try to start a car before programming is complete!
After completion, you will hear a beep and the LEDs will show the device
status (see the device description - LED features).
Errors:
• The programmer LEDs quickly blink red for a long time (more than 20 seconds)
or do not light up at all
–
car communication error.
•
Make sure the car is not in sleep mode (press the car's START
/STOP
button).
• If the START/STOP button light is on and the device cannot do operations - it is
probably an additional non OEM security system installed.
Alarm disabling