ADVANCED UV LIGHT ELIXIR Скачать руководство пользователя страница 30

Страница: 30 / 54

Original Dr. Müller

ORIGINAL DR. MÜLLER HIGH PERFORMANCE TANNING EQUIPMENT

Assembly

ATTENTION!

Cover the body cooling fan stack
to prevent screws from falling
into the stack.



Cover the body cooling fan stack.



If you want to assemble a new top plexi, unpack the top
plexi.



Put the top plexi on a soft blanket or padding material in
front of the sunbed.



Remove the protective foil.



Put the control panel from below to the opening for the
control panel at the top plexi.



Push the wires and plugs of the control panel through the
top plexi and the opening of the control panel support.



From above screw the control panel support to the
control panel.



Two persons lift the top plexi into the sunbed.



Put the top plexi into the rear groove.



Put the plug of the control panel into the terminal strip for
the control panel in the top.



Put the Display wire into the socket of the control panel.



Lift the top plexi upward.



One person holds the top plexi.



Mount the plexi rail and fasten with five scews.



Remove the cover from the body cooling fan stack.



Assemble the body cooling fan as described on page 27.

Front Cover Plate

The front cover plate must be disassembled whenever

•

the container of the aroma device must be replaced

•

the courtesy light lamps must be replaced

•

an A/C unit is installed or disassembled.

Disassembly



Open the sunbed plexi as described on page 28.



Loosen the two quick connectionen at the lower right and
left corner of the front cover plate.



Lift the front cover plate carefully from the sunbed by
pulling upwards.

Assembly



Fit the front cover plate with its hooks into the sunbed.



Fasten the two quick connections in order to fix the front
cover plate.



Close the sunbed as described on page 29.

Содержание ELIXIR























































Результаты поиска

Содержание ELIXIR

Отзывы:

Похожие инструкции для ELIXIR

Бренды по названию

Популярные бренды

ADVANCED UV LIGHT ELIXIR, Руководство пользователя

Результаты поиска

Содержание ELIXIR

Отзывы:

Похожие инструкции для ELIXIR

Бренды по названию

Популярные бренды