ElectraCOOL™ LA600
USER’S MANUAL
ADVANCED THERMOELECTRIC · PO Box 7091 · Nashua, NH 03060
Toll free: 1 (866) 665-5434
·
(603) 888-2467
·
fax: (603) 724-6740
·
e-mail: [email protected]
7
Caution: It is Customer’s responsibility to advise Advanced Thermoelectric if
the chiller needs to be set for 230V AC. The wrong voltage selection can cause
permanent Chiller damage, and will void the Warranty.
9.
WARRANTY
Your satisfaction is important to us. ADVANCED THERMOELECTRIC provides a one year,
full parts and labor warranty on
Electra
COOL brand chillers
:
At our discretion we will REPAIR OR REPLACE
defective products at no charge
including parts and labor, if necessary, provided that work is performed by Advanced
Thermoelectric or an authorized service center for Advanced Thermoelectric. Contact
us to determine who should repair your chiller when seeking and RMA (see section 11).
Buyer may also return PARTS that are defective with the prior consent of Advanced
Thermoelectric. We will replace defective parts at no charge. Labor charges incurred by
others during the inspection, removal and replacement of parts are not covered by this
warranty.
FREIGHT CHARGES for shipment to and from Advanced Thermoelectric or it’s
authorized representative are the responsibility of the Buyer.
WARRANTY CLAIMES must be made directly by the Buyer and in accordance with our
Return Policy outlined in our Operations and Maintenance (O&M) Manual. Unauthorized
returns are not accepted for repair under warrantee. Product must then be received,
inspected and if necessary tested by Advanced Thermoelectric and a product is deemed
covered by our warrantee only when Advanced Thermoelectric or it’s authorized
representative is reasonably satisfied that all conditions in the warranty have been met.
SHIPPING DAMAGES, both concealed and unconcealed are not covered under
warrantee. All shipping claims are the responsibility of the Buyer and we recommend
they be made immediately with the carrier. Where possible, returns should be sent
back in their original carton and packing to avoid subsequent shipping damages.
SPECIFICALLY NOT COVERED by this warrantee
is any damage caused to the product occurring
during, but not limited to, such events as improper installation, storage, or usage occurring during a
situation specifically cautioned against or noted in the product manual.
Specific situations, which invalidate the warranty, include (but are not limited to):
•
Removing the serial number label.
•
Any disassembly (partial or complete) of a heat exchanger, loosening or removing the bolts, or
separating the heat sinks.
•
Subjecting a heat exchanger to temperatures below the freezing point of the heat transfer fluid
contained inside the unit.
•
Subjecting a heat exchanger to unfiltered water.
•
Subjecting any product to temperature, voltage, current, or pressure (internal or external)
greater than that specified in the product manual.
•
Operation with any replacement components. As well as voiding the warranty, this will also void
the CE Mark
•
Any actions prohibited in the "Caution" section of the product manual.