7
Screens and Usage
Sequencer Screen
SEQUENCE DOWN/UP
This feature allows you to man-
ually operate the sequencer without the need for the
TX to be switched on.
To use this feature move the cursor to the SEQUENCE
DOWN item.
THEN...
Sequencer Outputs 1
-
6
Selecting this menu item will take you to the output
setup screen.
Highlight and select any output to set up:
•
Air valve end points, or reverse air valve function.
•
Servo end points, or reverse servo function.
There is also a speed setting to slow servo travel.
Continued over page...
RETURN DOWN
-
1
SEQUENCER SETUP
SEQ OUTPUT
1
—
6
Joystick
→
RIGHT
Arrow
—
Starts a Sequence to the up position.
Joystick
←
LEFT Arrow
—
Starts a sequence to the down position.
Joystick PRESS
—
Stops the sequence at the current sequence step.
Hint: The current sequencer position will be shown at the top right of the screen
Please Note: From the factory the sequencer is programmed with all outputs in the down
position for all sequence steps so you will not see any movement on the output channels
until the sequencer is programmed. A FAIL SAFE event will also over
-
ride the manual se-
quencing functionality.
RETURN DOWN
-
1
SEQUENCE DOWN
SEQUENCER SETUP
SEQ OUTPUTS 1
-
6
SEQUENCE DOWN
SEQ OUTPUT 1
SEQ OUTPUT 2
SEQ OUTPUT 3
SEQ OUTPUT 4
SEQ OUTPUT 5
SEQ OUTPUT 6
RETURN
