Advanced Poly-Packaging Advanced Poly-Bagger T-1000-S14 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 153

background image

Twin-SealTM - Seal the bag a second time, 3/8" from the first seal for additional bag integrity.
Estop - This option can be used to stop the cycle operation of the T-1000 and possibly other auxiliary
infeed or outfeed equipment if purchased with the T-1000.

CF-10 Counting Funnel

-

This option is useful to automatically cycle the bagger when a preset number of

parts have fallen through the funnel.

AF-10 Accumulating Funnel

-

A special purpose f unnel that collects and holds product until ready

to be dropped, it can also insert a funnel to help contain the product.

BO-20 Bag-Open Detector

-

This option will detect whether or not a bag is blown open, or whether or not a

funnel is inserted into the bag for validation that that bag is ready to receive product.

Bag-out sensor

-

If the bag material ends, a message will be displayed indicating out of bags or a threading

or web breakage issue.

DF-10 Diverting Funnel - This feature is used to count bags from the bagger and divert them for further
packaging operations including counting into cartons.

CS-10 Compartment Seal - seals the bag twice with compartments within the same bag.

MV-10 Seal Validation

-

additional components to provide a secondary means detecting a failure or out of

range condition for components that affect seal quality.

BV-10 Barcode Verifier

-

to verify that a barcode is readable. If no barcode is detected, or if a barcode is

not correctly formatted (as per software settings in the barcode verifier), then a NO READ message will be
displayed.

BO-30 Bag Opening Device

-

This device enters the bag with one or more “fingers” and then pulls the bag

open to a stop

.

Bag in Bag option -

A conveyor feeds bagged product to a second bagger to be bagged.

Base Height adjustment - electronic mechanism which raises or lowers the base of the bagger,
which allows for more versatility and convenience, without this option the operator would
raise or lower the bagger manually.

UF-2000 Takeaway Conveyor - Remove the packaged product to a packing station or directly feed a carton
or table, conveying the product from floor level. The conveyor perfectly fits underneath the T-1000 and
takes the product away. Small, lightweight and equipped with castors, use this conveyor anywhere in the
plant. Designed for 24 hour / 7 days a week operation.

UF-5000 Infeed conveyor - Kit packaging infeed conveyor. Instead of loading parts directly into the
Bag, load parts into compartments on the conveyor. Packaging kits loading the compatments by hand or
automatically with parts or scales

UC-2400 Vibratory Parts Counter - Automatic parts counter feeds fasteners, electronic components
injected molded parts and many other types of product, then drops the final count into the bag, carton
or infeed conveyor.

US-4000 Check Weigh Scales - When you must guarantee the contents of the bags or kits, APPI

9

9

«
...
10
11
12
13
14
...
»

Содержание Advanced Poly-Bagger T-1000-S14


























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Advanced Poly-Bagger T-1000-S14

Бренд: Walker Bay Страницы: 8

Бренд: Abicor Binzel Страницы: 92

Бренд: Rane Страницы: 38

Бренд: Kartsana Страницы: 36

Бренд: YASKAWA Страницы: 40

Бренд: Y.I.C. TECHNOLOGIES Страницы: 6

So-exercise TX7

Бренд: T-SoX Страницы: 8

Бренд: Kelvin Страницы: 30

TR 2B INC INT NC

Бренд: OMGA Страницы: 76

Бренд: Parkside Страницы: 37

Бренд: Analogue Solutions Страницы: 64

Power System KPS-US

Бренд: Keys Fitness Страницы: 8

AutoMate 2500 series

Бренд: Beckman Coulter Страницы: 50

Бренд: Grundig Страницы: 16

Бренд: Harken Industrial Страницы: 2

Бренд: Basko Healthcare Страницы: 2

Бренд: EZ Digital Страницы: 53

Бренд: Bard Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды