Advanced Native Technologies ASM 10, Руководство пользователя

Страница: 3 / 29

ENGLISH
ASM Series
| User manual
4 5 User manual |
ASM Series
2 | INSTALLATION
Each speaker is equipped with:
A | Recessed side handles
B | Ø 35mm. flange for pole mounting
C | Non-slip rubber feet
D | Front metal protection grille
.
For speaker installation and to guarantee its correct performance, strictly follow the
instructions below:
• Place the speaker in a horizontal position on a flat and stable surface, making sure
that all the lower rubber feet are perfectly adhering to the floor or to the supporting
surface. The speaker is designed for use on the floor (wedge monitor configuration).
• Never install the speaker on mobile carts, chairs, tables or similar objects that are
not stable or unable to withstand the weight.
• To allow for proper heat dissipation of the amplification, leave sufficient distance
between the rear panel of the speaker and other objects such as walls, corners, curtains,
and never place the appliance near sources of heat of any kind.
• When used outdoors, avoid places exposed to bad weather.
CAUTION: Install the speaker in a stable and safe way, so as to avoid any dangerous
condition for the safety of people and structures.
A A
C
C B
D
3 | DESCRIPTION
3.1 | INPUTS & CONTROLS
1 LINE INPUT L/R
Balanced line level inputs, with COMBO (XLR-F + 6,35mm. socket)
connectors. You can also use an unbalanced mic cable. The inputs level
is adjusted by LEVEL knob.
NOTE: Please try to always use balanced cables.
2 LINE / MIC BUTTON
Place the button on LINE (up) to use a line level source (mixer and pre-
amplified devices) or MIC (pressed) for using a microphone. To lower
or raise it, use a screwdriver with a small flat head.
3 LINK OUT
Link output of input signal on XLR-M plug. The signal of this output
depends on the setting of the LEVEL knob.
4 LIVE MONITOR / PLAYBACK BUTTON
Press this button to select the optimal equalization for using the speaker.
It is possible to select the equalization setting between two different
presets:
3
4 2
1