13
Enviro Kiosk
Assembly and Operation Instructions
8/27/19
Back Up Your Information
Superheroes need it, police depend on it and everyone that uses a computer should use some
form of it. Computers aren't perfect. Files become corrupt, motherboards malfunction, electrical
storms strike and CPUs call it quits taking our precious data with them.
Advanced Kiosks cannot recover your data. If a replacement, or repaired kiosk is required it will
be shipped with our standard installation.
Cooling Fans
The cooling option is included, and the kiosk will have two cooling fans. These are controlled by
a thermal switch. This switch is preset at the factory to turn the fans on when the internal
ambient temperature reaches 90°F. Under normal circumstances, these fans provide the
appropriate amount of air flow to keep the kiosk within the operating temperature range.
Note: The fans will not turn on if the temperature inside the kiosk is less than 90°F.
Heater
An internal heater is available for kiosks that will be located in environments that have seasonal
temperatures below freezing. The heater is controlled by a thermal switch. The switch is preset at
the factory to turn the heater on when the internal ambient temperature drops to 40°F.
Note: The heat will not turn on if the temperature is greater than 40°F.
Printer Paper Thickness
If using the Ticket Printer option, paper or stock must be a minimum of 0.005 Inches thick. Any
less will cause Jamming in the Ticket Printer. The maximum for the Ticket Printer is about 0.01
inches thick.
If using the Receipt Printer option, paper or stock must be a minimum of 0.002 Inches thick. Any
less will cause Jamming in the Receipt Printer. The maximum for the Receipt Printer is about
0.004 inches thick.
