9
Enviro Kiosk
Assembly and Operation Instructions
8/27/19
A certified electrician needs to be used if
the power supply box is going to be hard
wired into a power source.
The cable should be concealed using
appropriate conduit or similar material
from the power box to the kiosk so no one
can trip or tamper with the cord.
The power cable (as well as Ethernet
cable) needs to be run up from the bottom
of the kiosk, so no wires are exposed.
Connect the end of the cable into the plug
on the right-hand side of the kiosk. Once
plugged in, pull the security lever down to
ensure the plug is all the way in.
Labels inside of the kiosk, as well as on the power box, indicate the correct positioning for the
wires with corresponding pins on the plug.
Computer
The Computer will be secured in the kiosk, located in the second door along with all of the
power options. There are three cables that will be plugged into the computer: Power Cable, USB
Touchscreen Cable, DVI Video Cable. Ensure all are plugged in all the way and shipping hasn’t
vibrated any loose.
Wi-Fi
The Enviro kiosk does not come with Wi-Fi. While there are two available USB ports that a USB
Wi-Fi adapter may be plugged into. Advanced Kiosks does not recommend the option. We
recommend an insulated cat
Network Connection
A network connection requires a shielded category 5 or 6 cable be installed in conjunction with
the power cable.
Cables Through Here
