Specifications
2-1
Machine Dimensions
Length: 105”
Height: 60”
Depth: 57”
Weight: 2800 lbs.
Electrical Requirements
220/230 VAC single phase, 50/60 Hz, 20 Amp service.
Pneumatic Requirements
Approximately 2-3 cfm at 90 psi line pressure supplied via your cleaned/dried/regulated plant air.
Material Capacity
Upper Front Station:
10” Diameter x 72 long x 3” Diameter core. (Pressure Sensitive)
Lower Front Station:
10” Diameter x 72 long x 3” Diameter core. (Pressure Sensitive)
Upper Rear Station:
10” Diameter x 72 long x 3” Diameter core. (Pressure Sensitive)
Lower Rear Station:
10” Diameter x 72 long x 3” Diameter core. (Pressure Sensitive)
Middle Front Station:
8” Diameter x 72 long x 3” Diameter core. (Pressure Sensitive)
Warning: The diameters shown above are the physical dimensional limitations. The cantilevered
shafts should not be loaded with a roll of film weighing more than 70 lbs. Any more than this can
cause damage to the cantilever system.
