Operation
4-4
Right Rear Control Panel
The right rear control panel looks like the figure below.
Top Pull Roller Control:
Two position switch opens and closes the pull rolls.
The regulator adjusts the air pressure to the cylinders
and clutch. The gauge indicates air pressure which
allows for repeatable results.
Drive Motor Controls
:
RUN
button switches the laminator from jog mode to
run mode.
Speed Pot
sets the laminators speed. 0-20 FPM
STOP
button stops the drive from turning thus
stopping the rolls.
FWD REV
switch selects the direction the machine
will run.
Emergency Stop:
E-Stop switch will stop the laminator and open the
rolls.
Figure 3. Right Rear Control Panel
