Advanced Elements AE2042, Инструкция по эксплуатации

Страница: 7 / 13

TM
5. Repeat steps 2-4 for the next three Mounting Grommets.
6. After gluing and taping all four Mounting Grommets, leave the glue to
cure for at least 12 hours before installing the Accessory Frame for use.
7. Once the glue has dried, remove the duct tape, install the Accessory
Frame, and you are ready to go!
-------------------------------------------------------------------------------------------------
GROMMET APPLICATION FOR THE FOLLOWING AE MODELS:
• StraitEdge 1
• StraitEdge 2
6
You can use this application method for other PVC inflatables (where
you will need to glue to the outer PVC skin), as well as many hard-shell
kayaks. For hard-shells, check with the manufacturer for the appropriate
glue to use.
For this application you will need the following items from this package:
• 4 Mounting Grommets
• Application Glue
• Both Mounting Templates
Additional Items you will need for proper installation:
• Exacto or Matte Knife with a new blade
• Pencil
• Duct Tape