Advanced Elements AE2042, Инструкция по эксплуатации

Страница: 4 / 13

For this application you will need the following items from this package:
• 4 Mounting Grommets
• Application Glue
• Plastic Cutting Mat
• Both Mounting Templates
Additional Items you will need for proper installation:
• Exacto or Matte Knife with a new blade
• Fabric chalk or pencil
• Metal straight edge ruler
• Scotch Tape and Duct Tape
• 4 small sheets of cardboard approx. 5”x”5 in size
Your Accessory Frame should be in three parts (the main frame body,
and 2 detachable arms). Before starting, inflate your kayak so that you
can have it ready for positioning the Accessory Frame and for gluing the
Mounting Grommets into place.
Positioning the Mounting Grommets:
1. Slide two of the Mounting Grommets onto the main Frame Body and
position them so that they are just past the holes in the frame.
SEE IMAGE 1.
2. Slide one Mounting Grommet onto each of the Detachable Arms and
position them so that they are at the same end of the arm as the black
pole cap. SEE IMAGE 2.
Image 1
3
Accessory Frame System Instruction Manual
Image 2
3. Once the Mounting Grommets are in place, attach the Frame Arms
to the Frame Body.
4. Place the assembled Accessory Frame (with the Mounting Grommets
in place) on a flat surface and rotate the Mounting Grommets so that
the disk portion of each grommet lays flat and even on the surface.
Continued on Next Page