background image

 

 

 

26 

3.10  Disabling 

On selecting the Disable Menu, the display shows five possible options. For example: 

[Disable]                 User 1 Node  1 
 
  

ZONE/INPUTS

    OUTPUTS    GROUPS  

  CONTROLS       USER-ID         

 

Press the 



 buttons to highlight the required menu option and then press the 

 button to select it. 

3.10.1 Disable - Zones and Inputs 

This option provides the means to disable a complete zone, disable all input devices except call points or 
disable individual input devices. 

If the current User ID does not have the necessary permission, the display prompts for entry of a password to 
guard against inadvertent changes.  

On selecting this option, the display shows a list of the current zones and their current disablement status. For 
example: 

[   0 Zones with Inputs Disabled]  More> 
Zone    Mode         Location 

0001

    Enabled      BASEMENT WEST 

0002    Enabled      BASEMENT EAST  
0008    Enabled      GROUND FLOOR 
0009    Enabled      MAIN RECEPTION AREA 

 

Press the 



 buttons to scroll through the available zones, or key in a specific zone number. 

To disable the entire zone, move over to the Mode column and highlight the existing mode. Press the 

 button 

and a pop-up window appears showing the possible options: - 

 

 ALL INPUTS                

.

  

SELECTED INPUTS  
ONLY AUTOMATIC DETECTORS 

 

ONLY MANUAL DEVICES        ↓ 
ALL OTHER DEVICES 

  

Press the 



 buttons to scroll through and highlight the required option and then press the 

 button to select 

it.  

If ALL INPUTS is chosen, the pop-up window disappears and the State of the Zone is changed to ALL 
DISABLED. 

If SELECTED INPUTS is chosen, the pop-up window disappears and a list of the input devices within the 
selected zone is presented. For example: 

[  Inputs in Zone 0001]            More> 
Mld Mode       Device Text  
/ 1 

Enabled  

  Room 151 

/ 2 Disabled   Room 152 
/ 3 Enabled    Kitchen 
/14 Enabled    Lobby 

 
 
 

 

Press the 

 button for more information on the inputs, including full state, type, analogue value etc. 

Press the 



 buttons to scroll through and highlight the required input and then press the 

 button to disable 

it.  

Press the 

‘Esc’ 

button

 

to return. 

www.acornfiresecurity.com

www.acornfiresecurity.com

Содержание MX-5101












































Отзывы: